Enano Series
Glass to Glass Shower Hinge
SWH8500-CS4-PSS
- Glass to glass
- 90°
- 6/8 mm glass
SWH8500-CS4-PSS · Polished chrome
1 of 6Tap to enlarge
Finish
Views
About this part
Overview
Enano Series, for 6 to 8 mm glass
Fits 6 to 8 mm glass
The SWH8500-CS4 is a glass to glass shower hinge for a 90 degree corner join in a frameless shower enclosure, with a bevel edge.
Joins glass to glass, with a gap between the glass of 7 mm. Suitable for 6 or 8 mm toughened glass.
Choose from polished chrome (SWH8500-CS4-PSS) or satin brushed (SWH8500-CS4-SSS).
It belongs to our Enano Series, alongside the SWH8500-CS wall mount glass to wall hinge full back plate with bevel edge, the SWH8500-CSA wall mount glass to wall hinge offset back plate with bevel edge, the SWH8500-CS2 glass to glass 180 degree hinge with bevel edge and the SWH8500-CS3 glass to glass 135 degree hinge with bevel edge.
To complete the job: the SWSS-309B3 (seal for the door's edge), the SWCH20X15X20 (U channel for the fixed panel), the U CHANNEL END CAPS 20X15X20 (end caps for that channel), the SWSB-TUBE 19 (support bar for the fixed panel) and the SWSB-1A19 (wall bracket for the support bar). It is on page 12 of our catalogue.
Key features
- Self-centring hinge
- Bevel edge
Completes the job
Part of the Enano Series.
Detail
Specification
Every figure below is what the shop holds against this code. Where a measurement is not listed, we have not measured it, and we will not guess at one.
- Product code
- SWH8500-CS4
- Description
- Glass to Glass Shower Hinge
- Range
- Enano Series
- Finishes available
- Polished chromeSatin brushed
- Type
- Glass to glass hinge
- Hinge angle
- 90 degree
- Plate style
- Bevel edge
- Centring
- Self-centring
- Glass thickness
- 6/8 mm toughened
- Gap between glass
- 7 mm
- Finishes
- Satin Brushed
- Closing
- Self-closing within 5 degree
- Code
- SWH8500-CS4
- Series
- Enano Series
- Catalogue page
- 12
Technical drawing
Every measurement is on these drawings, not on the product photographs. Check the glass thickness and the cut-out before you order.
Dimensions in millimetres. Tap a drawing to open it full size.
Technical
Drawings, downloads and fitting
The drawings and documents to download for this part, and the glass preparation we cut to. The drawings themselves are under Specification.
Installation instructions
Drawings and CAD
Spec sheets
If something is wrong
Returns and guarantee
Consumer cancellation: stock items bought at a distance
If you buy stock items as a consumer online, by telephone or by mail, you normally have 14 days after receiving them to tell us you wish to cancel, followed by 14 days to send them back. No reason is required. Goods made to your specification are excluded from this change-of-mind right (Consumer Contracts Regulations 2013, regulation 28(1)(b)), and checkout tells you so before you pay.
Goods bought in person at a branch counter carry no statutory change-of-mind right. Our additional voluntary returns policy below applies to eligible stock items bought at a branch counter too, and your rights if goods are faulty are the same however you bought them.
Send a clear statement using our optional cancellation form, or contact us at shop@sw-glass.co.uk or call us on 0207 751 0011. Include your order reference and the goods affected. You do not need our permission to give a cancellation notice.
Refunds for statutory cancellation
We refund the price of the cancelled goods and, when the whole order is cancelled, the cost of our standard outbound delivery. An upgrade above standard delivery is not refundable under this right. There is no restocking fee.
We refund without undue delay and within 14 days after we receive the goods back or you provide evidence that you sent them, whichever happens first, unless we have offered to collect them. If we have offered collection, the refund is due within 14 days of your cancellation notice. Refunds use the original payment method unless you expressly agree otherwise, without a refund fee.
You may inspect goods as you would in a shop. Where the law permits, we may reduce the refund for loss in value caused by handling beyond what is needed to establish their nature, characteristics and functioning. A blanket unused-only condition does not apply to statutory cancellation.
Contact us for the correct return address and safe handling instructions. Return costs depend on the information given before purchase and the reason for return; we will confirm the applicable arrangement. Do not send broken glass.
Our additional voluntary returns policy
Where a statutory cancellation or faulty-goods remedy does not apply, our additional policy accepts eligible unused stock items in the same condition: within 7 days of the invoice date for a full refund, or from days 8 to 28 less 20% restocking. After 28 days, a manager may accept a return at their discretion. The last day of each window is included.
This additional policy does not replace consumer rights. Business purchases do not acquire consumer cancellation rights simply because they were placed online.
More in Enano Series
See allFree glass tools
Measure and check before you order
Free, in your browser, running on the same rules and prices as our checkout.
Park Royal branch on Google5.0from 8 Google reviewsRead them on Google
Ask us about this part. We reply within one working day, or ring 020 7751 0011.






